Mac Laptop—How to Connect to Room Wifi

 

For Mac, the default is going to WPA2 personal authentication in our room wifi, which is not supported. We need to configure WPA2 Enterprise, and then only it's connected. In example 2.4G, it's mentioned you can try 5G.

I tried Amrita-2.4G-A306; you can also try Amrita-2.4G-Room number and Amrita-5G-Room number.

in previously chick to Other

Click to Continue

Give you system password

I tried 5G; it's connected.

For ubuntu

1. Open Network Settings:
   Click on the network icon in the top-right corner of your screen and select "Settings" or "Wi-Fi Settings."

2. Locate Amrita Wi-Fi:
   From the list of available networks, find and select the Wi-Fi network named "Amrita."

3. Enter Login Credentials:

   • Security Type: Choose WPA/WPA2 Enterprise from the security options.
   • Authentication Method: Select Protected EAP (PEAP).
   • Anonymous Identity: Leave this field blank.
   • CA Certificate: Choose "Do not validate" (If a CA certificate is required, click here to download it.).
   • PEAP Version: Select Automatic or version 0 (if prompted).
   • Inner Authentication: Select MSCHAPv2.
   • Username: Enter your registered campus WI-FI username (e.g., your roll number or email username).
   • Password: Enter your corresponding campus Wi-Fi password.

4. Save and Connect:
   Click "Connect" or "Save" to complete the setup. Your system should now attempt to connect to the Amrita Wi-Fi network.

5. Verify Connection:
   Check if the Wi-Fi icon in the top-right corner shows as connected. If not, recheck the settings or contact the campus IT support team for assistance.

Click Here