THIS GUIDE PROVIDES INSTRUCTIONS FOR CONNECTING TO THE Amrita OR Amritaclass SSID USING THE INTEL WIFI DRIVER

kamalesh k

 THIS GUIDE PROVIDES INSTRUCTIONS FOR CONNECTING TO THE AMRITA OR                                      AMRITACLASS SSID USING THE INTEL WIFI DRIVER



   ARISTA         

                              
   
                                                                                                 HP


Go to Device Manager, then click on this process.


                      


The 802.11n/AC wireless mode must be disabled.


                                              


The transmit power level should be set to medium.

                                         


Generally, you should aim to use 5 GHz speed to achieve higher data speed.


Different Between 2.4 GHz and 5 GHz Please click here to get more ideas.


This type of Jio modem does not support ICTS Department.

                                                  


Feedback Form







0 Comments

Room WIFI not working

by
  Mythreyi Bhavanam room Wi-Fi  experienced Click here   (Mythreyi Bhavanam  & Yagnavalkia Bhavanam) Manually Off and on it's working click here   (Mythreyi Bhavanam  & Yagnavalkia Bhavanam) Recently, there was a problem with the room Wi-Fi that caused some virtual connectivity issues, but the physical connection was fine. It will be rectified soon, but temporarily, for those who are unable to connect to the room's Wi-Fi, please turn it off once and, after 2 minutes, turn it on. In this issue, only Mythreyi Bhavanam and Yagnavalkya Bhavanam occur.   Please check the Internet Protocol (IP) address if you get the 192.168 series; you will not be able to connect to the Internet. Only the 10 series gets Internet connectivity. The details on how to check this IP address are provided below. Start—---run----cmd type this command Ipconfig /all  If the display 192.16.1.35 does not receive internet connectivity, Ipconfig /release You get th...